Quote:
Originally Posted by notorious
You basically water popped the grain.
150 grit is more than enough for most woods. If you want to get Maple or Hickory to stain dark, a mixture of 50/50 denatured alcohol and water will do the trick. Mix it, spray it on (after sanding), and it should be dry in 1/2 hour and ready for stain.
Water popping before stain will allow it to penetrate across the entire board instead of just the grain. Put a heavy sealer and a couple coats of good finish (I use only floor finish, obviously) and you will have a perfectly smooth finished piece that is well protected.
I usually don't like to pop oak too hard because the grain is so open. I usually mix more alcohol in to minimize opening up the grain too much. If you open the grain too much you will get what's called bleedback and the product will look like shit.
|
Yeah but I...uh...use minwax. Poorly.
__________________
"If there's a god, he's laughing at us.....and our football team..."
"When you look at something through rose colored glasses, all the red flags just look like flags."
|