In need of gearhead help
Changed the starter in a 95 Chevy truck and when we put the battery cables on it tried to start. So went and got another starter and same thing happened.
Any ideas out there? |
Ignition
|
Quote:
|
Antifreeze. Er, wait...
|
Quote:
I only know that I had a problem at one time that I thought could be the alternator or the starter, but when I took it to the mechanic, it turned out to be the ignition. |
Haven't had a chance to look at your wiring, but if you have it hooked up right, you may have a starter enable relay stuck open.
Also, check to make sure none of your wires have fused anywhere |
Crap, a ignition switch is too much for me. I am not taking the steering wheel off. Any idea how you would test it?
|
Quote:
|
pulling a steering wheel is easy. wheel pulling kits are cheap. id run back through and K.I.S.S.
|
Thanks for the tips. Going to check out fuses now.
|
1 Attachment(s)
If you need it, I have info on 1995 P/Us, give me the model and engine, and I can see what I can provide.
ie, 1500, S-10, 2500, etc., then 4.3 V-6, 5.0 V-8, etc. EDIT: Here's a schematic if you have a 1500 with V-6 |
battery cable on the starter touching the "S" terminal. Move the cable and make sure the purple wire isn't touch the red battery cable.
|
2500 with the 350\5.7. Thanks for the help.
|
prolly got a wire in your bunch running to your starter grounding to something or to each other ...
|
Problem solved. It was a fuse. Thanks for all the help.
|
All times are GMT -6. The time now is 04:05 PM. |
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.