What hops are you using? Dry hopping usually does the trick for aroma, but you might want to do some 30-15min and flame out additions as well. That should boost the flavor profile.

Haven't used or heard too much about Nelson Sauvin hops. Let us know what you think.

Centennial. I probably need to boost the % a bit.

Any recommendations?

I have had beer brewed with Nelson hops. EFFING GOOD.

When you say %, do you mean IBUs? amount of hops? Alcohol? Centennial usually runs in the 9-11% AA ranges so I'm guessing you are getting around 100 IBUs which puts you more in the Imperial range. Is that what you are going for? What is your grain bill like?

I've done a nice single IPA with all Centennial (it was a 2 Hearted Ale Clone). Off the top of my head it was something like 5 oz all together; an ounce at 60, 45, 20, flame out, and dry hop. It ends up being around 60 IBUs with a OG around 1.060. Actually won a couple awards with that beer.

Centennial is one of my favorite hops, but if you want to get a wider array of flavors, you might throw in something else as well. If your going for the heavy floral/citrus Pacific NW feel, any of the C hops would be fine (Chinook, Cascade, Challenger). I'm also a big fan of Amarillo.

Thanks, this helps alot.

You had me at Two Hearted Ale Clone.

Haha, one of my absolute favorites.

I tracked down my recipe if you want to check it out:

10lb 2 Row
2lbs Vienna
8oz Carapils
8oz Crystal 15L

Mash 151 for 60 mins

Hop additions

.75oz Centennial 60mins
.25oz Centennial 45mins
1oz Centennial 20mins
1oz Centennial 5mins
1oz Centennial 1min
1oz Centennial dry hop 7 days

Yeast: Safale US05
Ferment @ 65 degrees for 4 weeks.

I guess I'll be joining you guys soon. Got a kit for Christmas. Haven't even attempted anything yet.

Funny that it has been about that long since I have come and visited you. Coincidence or not???

Do a lot of late addition.

Got a Kegerator last night and now I need to get the O2 bottle filled. Any help from the guys with kegging gear is appreciated.
Getting this setup has resparked my interest in brewing. Part of the reason I haven’t done it in a while is the hassle of sanitizing 50 some bottles to bottle my brew. If I could syphon it into one keg and let it effervesce there I’d probably do it more often.

You need to fill it with Co2 not O2. I'm in Wichita, but any welding or fire extinguisher place in your area should be able to fill it or exchange it. What else do you need help with? Is it home built or store bought kegerator? Do you have any kegs yet?

Ok, Co2, I was being lazy but you’re right there is a difference.
The reason I ask is there seems to be conflicting information on the internet as to whether a welding supply shop will have lubricant in the Co2, but thinking about it I can’t come up with any useful purpose that would serve to a welder.

Store bought, don’t have any kegs yet, just looking to get it setup and probably buy a keg of commercial beer just to try it out.
When I do get around to home brewing a batch I’ll most likely go with Cornelius Kegs but they have ball locks, one for gas in and one fluid out. How do you adapt that to a typical Sankey keg valve?

Is this a 5gal batch?

Ok, Co2, I was being lazy but you’re right there is a difference.
The reason I ask is there seems to be conflicting information on the internet as to whether a welding supply shop will have lubricant in the Co2, but thinking about it I can’t come up with any useful purpose that would serve to a welder.

Never ran into anything like that, but I have only heard of using welding supply place ancedotally, which I know a lot of people that do. I go to the Kansas Fire & Equipment here and get a 10lb filled for $14

Store bought, don’t have any kegs yet, just looking to get it setup and probably buy a keg of commercial beer just to try it out.
When I do get around to home brewing a batch I’ll most likely go with Cornelius Kegs but they have ball locks, one for gas in and one fluid out. How do you adapt that to a typical Sankey keg valve?

You have a couple choices, you can get some corny kegs that have the sanke fittings (called sixth barrels I believe). These are pretty expensive last I checked and I'm not that familiar with the functionality of them (cleaning, dissembling, etc.). I have seen some people convert ball lock kegs to sanke fittings, but am unfamiliar with that process as well. What I would do is take the sanke fitting off your kegerator hoses and put on ball lock disconnects. The only problem being you wouldn't be able to easily serve commercial sanke kegs in the future, as you would have to cut off the ball lock disconnects and reconnected your sanke fitting.

Yeah, 5 Gallons.